The M11, like the M9, features a door that opens automatically and quietly, making sterilization a set-it-and-forget-it procedure. Its unique 11" by 18" chamber gives it the distinction of the largest sterilizing capacity of any standard countertop autoclave on the market, making it perfect for larger packs and instruments. The Steam–Flush Pressure Pulse Air Removal System is so efficient that it can pass the air removal tests required on more complex vacuum steam sterilizer systems, thus ensuring good steam penetration for proper sterilization. Plus less complexity means better reliability and a cost effective solution for your sterilization needs. An optional printer accessory, available on the M11, provides records of the cycle, cycle time, temperature, and pressure.

The Ritter M11 autoclave has easy front access for filling and draining and has controls that are easy to understand.

Self Program Controls
Programmable controls allow for creation of different cycle parameters for special sterilization needs.  Programmable buttons allow you to change the following: Time (3 to 90 minutes), Temperature (230 to 275º F), Dry Time (0 to 60 minutes), Vent (slow or fast) and two program buttons. The #1 and #2 buttons allow you to store the change if desired.

Pre-Programmed Controls
Four pre-programmed sterilization cycle controls:  Unwrapped (132º C or 270º F for 3 minutes), Pouched (132º C or 270º F for 5 minutes), Packs (121º C or 250º F for 30 minutes), Handpiece (Dental Handpiece use only)

LCD Display
Indicates cycle selected, temperature and exposure time for selected cycle. During the cycle, the display shows messages describing status of cycle. When the cycle enters sterilization mode, remaining time is displayed as well as temperature and pressure.

Cycle Start
(Initiates selected cycle)

Manual Stop
(Terminates selected cycle or function)